STS RWD V8-4.6L VIN A (2006)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Crankshaft Balancer Replacement
^
Tools Required
-
J 24420-C Crankshaft Balancer Remover
-
J 38416-2 Crankshaft Button
-
J 41998-B Crankshaft Balancer Installer
-
J 45059 Angle Meter
-
EN 46326 Flywheel Holding Tool
Removal Procedure
1. Remove the accessory drive belts.
2. Remove the mechanical fan adapter, if equipped.
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
4. Remove the starter motor.
5. Install the EN 46326 .
6. Remove the crankshaft balancer bolt.