STS RWD V8-4.6L VIN A (2006)
and at the top of the block face.
2. Place the NEW engine front cover gasket over the crankcase dowel pins.
3. Place the engine front cover in position on the crankcase.
4. Apply the thread locking compound GM P/N 12345382 (Canadian P/N 10953489) or equivalent to the threads of the engine front cover bolts.
5. Install the engine front cover retaining bolts.
6. Notice: Refer to Fastener Notice in Service Precautions.
Tighten the engine front cover bolts in the sequence shown.
^
Tighten the engine front cover bolts in proper sequence to 15 Nm (11 ft. lbs.).
