STS RWD V8-4.6L VIN A (2006)
1. Install the auxiliary water pump.
2. Notice: Refer to Fastener Notice in Service Precautions.
Install the auxiliary water pump nuts.
^
Tighten the nuts to 90 Nm (80 inch lbs.).
3. Connect the auxiliary water pump electrical connector.
4. Connect the hose (3) to the auxiliary water pump.
5. Using the J 38185 slide the hose clamp back into the original position on the hose.
6. Connect the hose (1) to the auxiliary water pump.
7. Using the J 38185 slide the hose clamp back to the original position on the hose.
8. Fill the coolant. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (GE 47719) .
