STS RWD V8-4.6L VIN A (2006)
Air Register: Service and Repair
Air Inlet Housing Front Panel
AIR INLET HOUSING FRONT PANEL REPLACEMENT
REMOVAL PROCEDURE
1. Remove the fuel injector sight shield.
2. Remove the windshield wiper arms.
3. Remove the air inlet grille panel (1).
4. Disconnect the electrical connector (4) from the windshield wiper motor.
5. Remove the wiper motor module (6).
6. Remove the air inlet housing retaining nuts/bolts.
7. Remove the air inlet housing panel assembly from the vehicle.
INSTALLATION PROCEDURE
