STS RWD V8-4.6L VIN A (2006)
1. Install the air inlet housing panel assembly to the vehicle.
2. Install the air inlet housing retaining nuts/bolts.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the nuts/bolt to 6 N.m (53 lb in).
3. Install the wiper motor module (6).
4. Install the electrical connector (4) to the windshield wiper motor.
5. Install the air inlet grille panel (1).
6. Install the windshield wiper arms.
7. Install the fuel injector sight shield.
Instrument Panel Air Deflector
INSTRUMENT PANEL AIR DEFLECTOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the instrument panel (I/P) center trim.