STS RWD V8-4.6L VIN A (2006)
4. Remove the screws (1) that retain the air duct.
5. Remove the left air duct (2), by unsnapping the air duct from the HVAC module.
INSTALLATION PROCEDURE
1. Install the left air duct (2), by pressing down until you hear the tabs engage on the HVAC module.
2. Install the air outlet duct screws (1).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 2 N.m (18 lb in).
3. Connect the wiring harness to the air duct.
4. Install the foam dash pad (1).
5. Install the I/P retainer.
Air Outlet Duct - Instrument Panel (I/P) - Upper Right
AIR OUTLET DUCT REPLACEMENT - INSTRUMENT PANEL (I/P) - UPPER RIGHT
REMOVAL PROCEDURE
1. Remove the instrument panel (I/P) retainer.
2. Remove the foam dash pad (1).