STS RWD V8-4.6L VIN A (2006)
6. Remove the TXV line bracket.
7. Remove the TXV from the evaporator core.
8. Separate the TXV from the A/C lines by pulling straight out.
9. Remove the TXV.
INSTALLATION PROCEDURE
1. Lubricate the O-rings. Refer to O-Ring Replacement.
2. Install the A/C lines into the TXV.
3. Carefully slide the TXV onto the evaporator core until seated.
4. Install the TXV line bracket.
5. Install the bolts (1) that secure the TXV to the evaporator.
NOTE: Refer to Fastener Notice in Service Precautions.
