STS RWD V8-4.6L VIN A (2006)
1. Install new O-rings to the liquid line.
2. Install the liquid line in to the vehicle.
3. Connect the liquid line to the evaporator core.
4. Install the A/C quick connect fitting.
5. Install the wiper motor module assembly.
6. Connect the liquid line to the strut tower retaining clip.
7. Connect the liquid line to the condenser tube.
8. Install the A/C quick connect fitting.
9. Install the air cleaner from the vehicle.
10. Evacuate and recharge the refrigerant system. Refer to Refrigerant Recovery and Recharging.
11. Using J 39400-A, leak test the fittings of the component.