STS RWD V8-4.6L VIN A (2006)
^
Using the tire machine, rotate the tire/wheel assembly clockwise when transferring the tire bead to the inside of the wheel rim.
^
Repeat items for the outer bead.
Install the tire on the wheel.
5. Important: A service replacement tire pressure sensor is shipped in OFF mode. In this mode the sensors unique identification code cannot be
learned into the antenna modules memory. The sensor must be taken out of OFF mode by spinning the tire/wheel assembly above 32 km/h (20
mph) in order to close the sensors internal roll switch for at least 10 seconds.
Install the tire/wheel assembly on the vehicle.
6. Lower the vehicle.
7. Learn the tire pressure sensors.
