STS RWD V8-4.6L VIN A (2006)
5. Install the bolts securing the transmission support to the underbody.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the transmission support bolts to 60 N.m (44 lb ft).
6. Install the bolt securing the fuel filter bracket to the body.
Tighten the fuel filter bracket bolt to 9 N.m (80 lb in).
7. Push upward in order to connect the fuel/brake bundle chassis pipe retainer to the underbody.
8. Complete the following in order to install the chassis hose/pipes to the retainers (2) located at the rearward portion of the rail:
1. Install the chassis hose/pipes into the retainers (2).
2. Close the retainers (2) at the top.
3. Insert the retainers (2) into the rail.
9. Install the chassis hose/pipes into the retainers (1) located at the forward portion of the rail.
10. Close the retainers.
11. Push the locking mechanism (1) inward in order to engage the fuel/brake bundle chassis pipe retainers to the rail.