STS RWD V8-4.6L VIN A (2006)
Ignition Coil: Service and Repair
Ignition Coil(s) Replacement - Bank 2
IGNITION COIL REPLACEMENT - BANK 2
REMOVAL PROCEDURE
1. Remove the fuel injector sight shield.
2. Remove the ignition coil cover from the cam cover by lifting straight up.
3. Disconnect the ignition coil wiring harness electrical connector from the coil that needs to be replaced.
4. Remove the ignition coil retaining bolt.
5. Carefully remove the ignition coil assembly.
INSTALLATION PROCEDURE
