STS RWD V8-4.6L VIN A (2006)
Body Control Module: Service and Repair
Instrument Panel Module Replacement
INSTRUMENT PANEL MODULE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the instrument panel compartment.
2. Remove the screws securing the dash integration module to the module bracket.
3. Disconnect the electrical connectors.
INSTALLATION PROCEDURE
1. Connect the electrical connectors.
2. Install the module to the bracket.
3. Install the screws that secure the module to the bracket.
Tighten the screws to 2 N.m (18 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the instrument panel compartment.
5. Reprogram the module. Refer to Control Module References. See: Testing and Inspection/Programming and Relearning
