cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Deployment Inside Vehicle (Vehicle Scrapping Procedure)|Page 18753 > < Deployment Inside Vehicle (Vehicle Scrapping Procedure)|Page 18751
Page 1
background image

Air Bag: Service and Repair
Inflatable Restraint Instrument Panel Module Replacement

INFLATABLE RESTRAINT INSTRUMENT PANEL MODULE REPLACEMENT

REMOVAL PROCEDURE

1. Disable the SIR system. Refer to SIR Disabling and Enabling.

CAUTION:
-

Refer to SIR Inflator Module Handling and Storage Caution in Service Precautions.

-

A deployed dual stage inflator module will look the same whether one or both stages were used. Always assume a deployed dual stage
inflator module has an active stage 2. Improper handling or servicing can activate the inflator module and cause personal injury.

-

Refer to SIR Caution in Service Precautions.

2. Remove the I/P retainer.

3. Note the wire harness routing position on the I/P module, to help in assembly.

4. Remove the I/P module mounting fasteners.
5. Remove the I/P module from the I/P.

INSTALLATION PROCEDURE

1. Route the I/P module pigtail down through the I/P.
2. Install the I/P module to the instrument panel.
3. Install the I/P module mounting fasteners.

NOTE:  Refer to Fastener Notice in Service Precautions.

Tighten the fasteners to 9 N.m (80 lb in).

Deployment Inside Vehicle (Vehicle Scrapping Procedure)|Page 18753 > < Deployment Inside Vehicle (Vehicle Scrapping Procedure)|Page 18751