STS RWD V8-4.6L VIN A (2006)
Power Steering Pump: Service and Repair
Power Steering Pump Pulley Replacement
Power Steering Pulley Replacement
Tools Required
^
J25033-C Pulley Installer
^
J25034-C Pulley Remover
Removal Procedure
1. Remove the air cleaner intake duct.
2. Release the belt tension and slide the belt off the pulley..
3. Using the J25034-C, remove the power steering pump pulley from the power steering pump.
Installation Procedure
1. Using the J25033-C, install the power steering pump pulley to the power steering pump.
2. Ensure that the axial tolerance of the power steering pulley on the power steering pump is within 0.25 mm (0.010 inch).
3. Install the drive belt.
4. Install the air cleaner intake duct.