STS RWD V8-4.6L VIN A (2006)
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the steering wheel control harness retainer and screw.
Tighten the screw to 2.3 Nm (20 inch lbs.).
4. Install the steering wheel control switch assembly screws.
Tighten the screws to 2.3 Nm (20 inch lbs.).
5. Connect the steering wheel control electrical connector.
6. Secure the connector to the retaining clip.
7. Install the steering wheel inflatable restraint module.
8. Enable the SIR. Refer to Restraint System Disabling and Enabling Zone 3.