STS RWD V8-4.6L VIN A (2006)
2. Install a new lower control arm ball stud retaining nut.
Notice: Refer to Fastener Notice.
1. Tighten the nut to 20 N.m (15 lb ft).
2. Tighten the nut to an additional 210 degrees.
3. Install the upper control arm ball stud to the steering knuckle.
4. Install a new upper control arm ball stud retaining nut.
1. Tighten the nut to 20 N.m (15 lb ft).
2. Tighten the nut to an additional 210 degrees.