STS RWD V8-4.6L VIN A (2006)
Accumulator: Service and Repair
Control Valve Body Accumulator Assembly Replacement
Removal Procedure
1. Remove the transmission fluid pan and filter.
2. Disconnect the internal electrical wiring harness connectors from all internal electrical components (1-8).
3. Remove ONLY bolts (1, 3) from the valve body assembly. Do NOT remove bolts (2) called out in the graphic.
4. Remove the bolts (3) securing the control valve body accumulator assembly (1) and manual shaft detent assembly (2) to the transmission case.
5. Remove the manual shaft detent assembly (2) and control valve body accumulator assembly (1) from the transmission.