STS RWD V8-4.6L VIN A (2006)
7. Install the 5 remaining bolts (1) and 1 remaining bolt (2). Hand tighten only.
Notice: Bolt torque sequencing is critical to the proper function of the control solenoid valve assembly. Failure to follow the required sequencing may
result in transmission malfunction.
8. Tighten all bolts in the sequence shown. The 2 "heat sink" bolts (17,18) must be tightened last.
Tighten
Tighten bolts to 8 Nm (6 ft lbs)
