STS RWD V8-4.6L VIN A (2006)
Torque Converter: Service and Repair
5L40-E/5L50-E - Automatic Transmission
Torque Converter Replacement
Removal Procedure
1. Remove the transmission from the vehicle.
2. Remove the torque converter from the transmission.
3. Remove the input shaft seal. Refer to Seal Replacement - Torque Converter.
Installation Procedure
1. Important: Take care to prevent cutting of the input shaft seal on the input shaft splines.
Install the input shaft seal. Refer to Seal Replacement - Torque Converter.