STS RWD V8-4.6L VIN A (2006)
Install the wheel bearing/hub to the vehicle.
2. Install the wheel bearing/hub retaining bolts.
Tighten the bolts to 125 Nm (92 ft. lbs.).
3. Install the upper control arm to the knuckle.
4. Install the upper control arm to knuckle retaining nut.
Tighten the upper ball joint nut to 20 Nm (15 ft. lbs.) plus a additional 210 degree turn.
5. Install a new wheel drive shaft retaining nut.
Tighten the nut to 160 Nm (118 ft. lbs.).
6. Install the brake rotor.
