XLR V8-4.6L VIN A (2006)
1. Install the DIC switch to the IP cluster bezel.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the DIC switch retaining screws.
Tighten the screws to 1.5 N.m (13 lb in).
3. Connect the DIC switch electrical connector.
4. Install the retaining screw at the bottom of the DIC switch pad.
Tighten the screw to 1.5 N.m (13 lb in).
5. Install the knee bolster trim panel.
6. Install the closeout/insulator panel.
