XLR V8-4.6L VIN A (2006)
4. Using a Metal Inset Gas (MIG) welder, weld a 51 mm (2 in) stitch along the tow hook to the impact bar in 4 places (1).
*
Front
*
Rear
*
Inboard side
*
Outboard side
5. Apply the sealers and anti-corrosion materials to the repair area, as necessary. Refer to Anti-Corrosion Treatment and Repair in Paint and Coating.
6. Paint the repair area. Refer to Basecoat/Clearcoat Paint Systems in Paint and Coating.
7. Install all related panels and components.
8. Connect the negative battery cable.
9. Enable the SIR system. Refer to SIR Disabling and Enabling Zones in Restraint Systems.
