XLR V8-4.6L VIN A (2006)
Removal Procedure
Important: When removing the power window switch, place the ignition switch in the OFF position.
1. Remove the door trim panel.
2. Remove the retainer screws from the back of the upper trim panel.
3. Remove the upper trim from the door.
4. Remove the inner energy absorber from the door panel.
5. Remove 4 retaining screws from the rear of the armrest.
6. Remove 1 retaining screw from the forward end of the armrest assembly.
7. Disconnect the armrest wire harness and remove the armrest assembly.