XLR V8-4.6L VIN A (2006)
1. Position the striker (2) onto the door, with the latching pin toward the door latch.
2. Install the fasteners (1) snugly onto the striker.
Notice: Refer to Fastener Notice.
3. Align the striker (2) to the previous marks. Tighten the fasteners.
Tighten the door lock striker screws to 24 N.m (18 lb ft).
4. If you are unable to locate the previous striker marks, perform the following steps:
1. With the striker installed, and the fasteners snug but still adjustable, have an assistant hold the outer door panel flush with the quarter panel.
2. Tighten the striker fasteners from the interior of the vehicle while the door is flush with the quarter panel.
Tighten the door lock striker screws to 24 N.m (18 lb ft).
