XLR V8-4.6L VIN A (2006)
10. Install the shock absorbers to the lower control arms.
Tighten the shock absorber lower mounting nuts to 28 N.m (21 lb ft).
11. Install the power steering gear to the crossmember.
Tighten the power steering gear mounting bolts to 100 N.m (74 lb ft).
12. Install the bolts to the BPMV bracket.
13. Connect the intermediate shaft to the steering gear.
14. Install the steering linkage outer tie rod ends to the steering knuckles.
15. Connect the electronic suspension control (ESC) sensor links.
16. Install the stabilizer shaft to the vehicle.
17. Install the tire and wheel assemblies.
18. Lower the vehicle.
19. Remove engine support fixture from the engine.
20. Perform a vehicle front end alignment. Refer to Measuring Wheel Alignment in Wheel Alignment.
