XLR V8-4.6L VIN A (2006)
Important: Install the front of the console under the rear of the I/P carrier.
6. Install the console into position. Insert the front of the console under the rear of the I/P carrier.
Notice: Refer to Fastener Notice in Service Precautions.
7. Install the console retaining nuts and the retaining bolt to the I/P carrier.
Tighten the nuts to 10 N.m (89 lb in).
8. Install the console trim plate.
9. Install the console cupholder and the ashtray.
10. Install the hinge cover to the console bin. Push down on the cover to engage the retaining clips.
11. Close the console door. Verify that the door fits and latches correctly.
12. Install the shifter knob.
13. Connect the battery ground cable.