XLR V8-4.6L VIN A (2006)
1. Install the knee bolster bracket into position as marked prior to removal.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the retaining bolts which secure the knee bolster bracket to the SIR bracket.
Tighten the bolts to 12 N.m (106 lb in).
3. Install the SIR module (1) to the SIR bracket (2) as marked prior to removal.
4. Install the SIR module retaining nuts (3).
Tighten the nuts to 10 N.m (89 lb in).
