XLR V8-4.6L VIN A (2006)
16. Remove the bolts which secure the steering column bracket to the I/P upper support beam.
17. Remove the steering column bracket.
Installation Procedure
1. Install the steering column bracket into position as marked prior to removal.
2. Install the bolts which secure the steering column bracket to the I/P upper support beam. Do NOT tighten the bolts.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the bolts which secure the steering column bracket to the I/P lower support beam.
Tighten all of the bolts to 10 N.m (89 lb in).
4. Connect the master cylinder push rod to the clutch pedal.
