XLR V8-4.6L VIN A (2006)
Tighten the screws to 1.9 N.m (17 lb in).
3. Install the driver knee bolster trim panel.
Knee Bolster Bracket Replacement - Right
Knee Bolster Bracket Replacement - Right
Removal Procedure
1. Remove the I/P carrier.
2. Remove the bolts retaining the passenger knee bolster bracket to the passenger SIR bracket.
3. Remove the passenger knee bolster bracket.
Installation Procedure
1. Install the passenger knee bolster bracket.
Notice: Refer toFastener Notice in Service Precautions.
2. Install the retaining bolts that secure the passenger knee bolster bracket to the passenger SIR bracket.
Tighten the bolts to 12 N.m (106 lb in).
3. Install the I/P carrier.
Trim Pad Replacement - Instrument Panel (I/P)
Trim Pad Replacement - Instrument Panel (I/P)
Removal Procedure
1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 4 and to SIR Disabling and Enabling Zone 5 in Restraint Systems.
2. Remove the console.
3. Remove the instrument panel (I/P) accessory trim plate.
4. Remove the driver side knee bolster.
5. Remove the driver information center (DIC).
6. Remove the dimmer/head-up display switch.
7. Remove the windshield side garnish moldings.
