XLR V8-4.6L VIN A (2006)
1. Remove the passenger floor mat from the floor.
2. Disengage the kick-up panel by folding the panel down to the floor.
Installation Procedure
1. Lift the kick-up panel and press the panel into place.
2. Install the passenger floor mat.
Molding Replacement - Rear Window Lower
Molding Replacement - Rear Window Lower
Removal Procedure
1. Open the rear compartment.
2. Lower the rear compartment partition.
3. Remove the rear window retaining bolts which secure the lower molding to the folding top.
4. Remove the lower molding out of the rear compartment.
Installation Procedure
