XLR V8-4.6L VIN A (2006)
1. Install the panel stowage trim assembly to the rear window panel trim.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the retaining screws which secure the panel stowage to the rear window panel trim.
Tighten the screws to 2.5 N.m (22 lb in).
3. Close the door on the rear compartment panel stowage.
Trim Assembly Replacement Roof Bar Tube
Trim Assembly Replacement - Roof Bar Tube
Removal Procedure
1. Power operate the folding top system to the fully down and stored position.
2. Position the roof bar tube trim up by grasping the outer trim material and moving up while twisting the trim back and forth.
3. Remove the retaining bolt foam plugs from the roof bar tube.
4. Remove the retaining bolts from the tube assembly.
5. Remove the roof bar tube. Lift up to disengage the tube from the tube receiver.
Installation Procedure
