XLR V8-4.6L VIN A (2006)
6. Remove the cylinder hose O-ring (1).
Important: Replacement cylinders are filled with fluid. Do NOT remove the port plug from the cylinder until you are ready to connect
the cylinder hose.
7. Using a small flat-bladed tool, release one of the port plug retainer clips from the replacement cylinder.
8. Remove the retainer clips from the replacement cylinder.
9. Remove the port plug from the replacement cylinder.
10. Remove the port plug O-ring from the replacement cylinder.
11. Install a new O-ring (1) onto the cylinder hose (2).
12. Install the hose (2) into the cylinder port (3). Press down on the hose until the hose is fully seated in the cylinder.
