XLR V8-4.6L VIN A (2006)
1. Place the folding top in the down position.
2. Remove the storage compartment closeout panel.
3. Using an open-end wrench, remove the drive rods from the hinge.
4. Use a grease pencil to mark the location of the bolts (2) on the hinge and the bumpers (3) to the hinge.
5. Measure the distance from the hinge to the edge of the bumpers.
6. Loosen the hinge bumper jam nuts and remove the bumpers.
7. Remove the hinge bolts (2).
8. Remove the hinge from the vehicle.