XLR V8-4.6L VIN A (2006)
Important: Once the cylinder hose or the port plug has been removed, do NOT move the cylinder rod. This will cause fluid to squirt out
of the ports.
1. Ensure that the ignition switch is in the OFF position and that the folding top has not been operated under power for at least 6 minutes.
2. Remove the reservoir filler plug (1).
Important: Remove the 2 hose connectors one at a time. This procedure is repeated later for the second hose.
3. Using a small flat-bladed tool, release the retainer clip (1) from one of the cylinder hoses.
