XLR V8-4.6L VIN A (2006)
2. Apply LOCTITE(TM) Blue, GM P/N 12345382 (Canadian P/N 10953489) or equivalent to the bolts.
Notice: Refer to Fastener Notice in Service Precautions.
3. Align the bolts to the marks on the support bracket.
Tighten the bolts to 11 N.m (97 lb in).
4. Install the shims in the same locations.
5. Pull the link (2) forward until the slots are seated against the studs. Install the center link nuts (1).
Tighten the nuts to 11 N.m (97 lb in).
6. Position the hydraulic cylinder (2) to the folding top support bracket (1).