XLR V8-4.6L VIN A (2006)
15. Adjust the outer compartment closeout panel, if necessary. Refer to Folding Top Storage Compartment Closeout Panel Adjustment - Front Outer.
16. Remove the protective covering.
17. Cycle the folding top under power through one complete cycle in both directions.
18. Inspect the folding top for proper operation.
19. Install the rear window panel.
Folding Top Storage Compartment Closeout Panel Replacement - Front
Folding Top Storage Compartment Closeout Panel Replacement - Front
Removal Procedure
1. Place the folding top in the down position.
2. Open the rear compartment.
3. Place a protective covering over the interior of the vehicle and the adjacent body panels.
4. Locate the hydraulic pump beneath the carpet in the storage compartment on the driver side of the trunk.
5. Turn the pump bypass valve (1) counterclockwise until the valve stops.
6. Remove the storage compartment.