XLR V8-4.6L VIN A (2006)
3. Install the remainder of the weatherstrip to the folding top panel above the rear window. Work the weatherstrip from the corners to the center on
the vehicle, ensuring that the seal flange (1) is seated behind the rear window (2). Gently use a rubber mallet to ensure full engagement of the
weatherstrip to the flange.
4. Install the pushpin retainers (1).
5. Ensure that the lower weatherstrip (2) is seated between the folding top panel (1) and the weatherstrip leg (3).
6. Install the bottom of the weatherstrip leg to the folding top panel.