XLR V8-4.6L VIN A (2006)
Convertible Top Weatherstrip: Service and Repair
Folding Top Weatherstrip Retainer Replacement - Side Front
Folding Top Weatherstrip Retainer Replacement - Side Front
Removal Procedure
1. Manually open the folding top as shown in the illustration. Refer to Folding Top Manual Operation.
The distance (A) from the windshield header to the leading edge of the folding top panel is 400 mm (15.75 in).
2. Place a protective covering over the interior of the vehicle and the adjacent body panels.
3. Remove the weatherstrip from the weatherstrip retainer.
4. Using a grease pencil, mark the location of the weatherstrip retainer to the folding top panel.
5. Remove the weatherstrip retainer screws.
6. Remove the weatherstrip retainer from the vehicle.
Installation Procedure