XLR V8-4.6L VIN A (2006)
7. Remove the weatherstrip from the vehicle.
Installation Procedure
1. Position the weatherstrip to the vehicle.
2. Install the corners of the lower weatherstrip (1) to the folding top panel flange (2). Work the weatherstrip from the corners to the center on the
vehicle. Gently use a rubber mallet to ensure full engagement of the weatherstrip to the flange.
3. Install the remainder of the weatherstrip to the folding top panel. Ensure that the weatherstrip (1) is seated on the folding top panel flange (2), and
that the seal flange (3) is seated behind the folding top panel (4). Gently use a rubber mallet to ensure full engagement of the weatherstrip to the