XLR V8-4.6L VIN A (2006)
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the bolts which secure the steering column bracket to the I/P lower support beam.
Tighten all of the bolts to 10 N.m (89 lb in).
4. Connect the master cylinder push rod to the clutch pedal.
5. Position the cruise control release switch and bracket to the steering column bracket.
6. Install the bracket bolts to the cruise control release switch.
Tighten the bracket bolts to 12 N.m (106 lb in).
7. Install the brake booster nuts.
Tighten the nuts to 29 N.m (21 lb ft).
8. Connect the master cylinder push rod to the brake pedal.
9. Install the accelerator pedal assembly with accelerator pedal position sensor.
