XLR V8-4.6L VIN A (2006)
4. Install the retaining screw at the bottom of the trim panel.
Tighten the screw to 1.9 N.m (17 lb in).
5. Install the knee bolster trim panel.
Knee Bolster Bracket Replacement - Left
Knee Bolster Bracket Replacement - Left
Removal Procedure
1. Remove the driver knee bolster trim panel.
Important: The following step must be performed to assure proper trim fits during installation.
2. Mark the location of the driver knee bolster bracket.
3. Remove the screws retaining the driver knee bolster bracket to the steering column bracket.
4. Remove the driver knee bolster bracket.
Installation Procedure
1. Install the driver knee bolster bracket into position as marked prior to removal.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the screws which retain the driver knee bolster bracket to the steering column bracket.