XLR V8-4.6L VIN A (2006)
2. Install the spring clip (1).
Notice: Refer to Fastener Notice in Service Precautions.
Important: Using air tools to install the nut may damage the bolt through tube.
3. Install a new nut (3) and tighten with hand tools.
Tighten the nut to 110 N.m (81 lb in).
4. Scuff all bonding surfaces.
5. Clean all bonding surfaces with a lint-free rag using a naphtha solvent.
Important: Balsa wood (1) is sandwiched in between the floor. Balsa wood will rot when wet complete sealing of the balsa wood is
necessary.
Important: Bonding surfaces must be dry before applying adhesive.
6. Apply adhesive (2) GM P/N 89020330 (Canadian P/N 8902332) as necessary to seal the balsa wood.