XLR V8-4.6L VIN A (2006)
Tighten the regulator channel stud nuts to 10 N.m (89 lb in).
15. Run window glass to the full down position.
16. Tighten the nuts to the regulator channel studs in the following order:
1. Lower forward
2. Lower rearward
Tighten the regulator channel stud nuts to 10 N.m (89 lb in).
17. Install the small mastic seals in the window clamp sight access holes.
18. Connect the harness electrical connector to the speakers. Install the connector lock.
19. Install the uppermost screws (4) mounting the speaker assembly to the door.
