chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Door Trim Plate Replacement - Front|Page 9549 > < Door Trim Plate Replacement - Front|Page 9547
Page 5
background image

3. Remove the inner panel upper bar from the door.

Installation Procedure

1. Install the inner panel upper bar to the door.

Notice:  Refer to Fastener Notice   in Cautions and Notices.

2. Install the bolts that retain the bar to the door.

   Tighten the bolts that retain the bar to the door to 25 Nm (18 lb.ft.).

3. Install the trim panel. Refer to Door Trim Panel Replacement   (See: ).

Front Side Door Water Deflector Replacement

Front Side Door Water Deflector Replacement

Removal Procedure

1. Remove the trim panel. Refer to Door Trim Panel Replacement   (See: ).
2.   Use a 6mm (0.24in) drill bit in order to remove the head from the door bracket rivets.
3. Remove the rivets that retain the bracket to the door.

Important:  Water deflectors seal the inner panel. Water deflectors prevent water from entering into the body. A strip of adhesive

Door Trim Plate Replacement - Front|Page 9549 > < Door Trim Plate Replacement - Front|Page 9547