Astro Van 2WD V6-4.3L VIN W (2001)
10. Remove the caliper mounting bolts.
11. Remove the caliper.
12. Remove the brake pads.
13. Remove the bushings.
14. Remove the sleeves (RWD only).
15. Inspect the caliper bolts for corrosion or damage. Do not attempt to polish away any corrosion. If corrosion is found, use new parts, including
bushings, when installing the caliper.
Installation Procedure
1. If reusing the brake caliper pin bolts and retainers, clean the brake caliper pin bolts and retainers using denatured alcohol, or equivalent.
2. Dry the brake caliper pin bolts using non-lubricated, filtered air.
3. Apply high temperature silicone brake lubricant to the brake caliper pin bolts and retainers. DO NOT apply lubricant to the brake pad hardware.