Astro Van 2WD V6-4.3L VIN W (2001)
1. For AWD vehicle install the engine mount to the frame (left side shown).
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the AWD vehicle engine mount to the frame bolts.
Tighten the AWD vehicle engine mount to frame bolts to 59 Nm (44 ft. lbs.).
3. If removed, install the RWD vehicle left side bolts, nuts and engine mount frame bracket to the frame.
^
Tighten the engine mount frame bracket bolts to 47 Nm (35 ft. lbs.).
^
Tighten the engine mount frame bracket nuts to 42 Nm (31 ft. lbs.).
4. Install the RWD vehicle left side engine mount, the bolts, and the nuts to the frame bracket.
^
Tighten the engine mount to frame bolts to 47 Nm (35 ft. lbs.).
^
Tighten the engine mount to frame nuts to 42 Nm (31 ft. lbs.).
