chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Recall - Hazard Warning Flasher Switch Replacement|Page 10939 > < Recall - Hazard Warning Flasher Switch Replacement|Page 10937
Page 13
background image

25.

Remove the screws attaching the lower steering column cover to the steering column.

26.

Remove the lower steering column trim cover from the upper steering column trim cover.

27.

Tilt the lower steering column trim cover down.

27.1 Slide the lower steering column trim cover backward in order to disengage the locking tabs.

28.

Remove the upper steering column trim cover mounting screws (1).

29.

Lift the upper steering column trim cover to gain access to the lock cylinder access hole.

30.

Using a bent tip awl, insert the tip into the ignition lock cylinder access hole.

31.

Turn the ignition lock cylinder to the START position.

32.

Using the bent tip awl, push down on the ignition lock cylinder retaining pin.

Recall - Hazard Warning Flasher Switch Replacement|Page 10939 > < Recall - Hazard Warning Flasher Switch Replacement|Page 10937