Astro Van 2WD V6-4.3L VIN W (2001)
14. Remove the compressor hose assembly nut (6) from the condenser.
15. Remove the compressor hose assembly nut (1) from the accumulator.
16. Remove the compressor hose assembly from the vehicle.
17. Cap or plug all open connections.
INSTALLATION PROCEDURE
1. Uncap or unplug all open connections.
2. Install the compressor hose assembly to the vehicle.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the compressor hose assembly nut (1) to the accumulator.
Tighten
Tighten the compressor hose assembly nut (1) to the accumulator to 48 N.m (35 lb ft).
4. Install the compressor hose assembly nut (6) to the condenser.
Tighten
Tighten the compressor hose assembly nut to the condenser to 28 N.m (21 lb ft).
