chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Crankshaft Position Timing Ring > < CKP System Variation Learn Procedure|Page 3890

Astro Van 2WD V6-4.3L VIN W (2001)

Page 4
background image

5. Connect the CKP sensor harness connector.

6. Install the steering linkage shield.

7. Install the steering linkage shield mounting bolts.

Tighten
Tighten the bolts to 33 N.m (24 lb ft).

8. Lower the Vehicle.
9. Perform the CKP System Variation Learn Procedure. Refer to CKP System Variation Learn Procedure.  See: Testing and Inspection/Programming

and Relearning

Crankshaft Position Timing Ring > < CKP System Variation Learn Procedure|Page 3890