chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Relays and Modules - Lighting and Horns > < A/C Compressor Clutch Relay|Page 172

Astro Van 2WD V6-4.3L VIN W (2001)

  • Relays and Modules
  • Relays and Modules - Instrument Panel
  • Audible Warning Device Control Module
  • Component Information
  • Service and Repair

Page 1
background image

Audible Warning Device Control Module: Service and Repair

MULTIFUNCTION ALARM MODULE REPLACEMENT

REMOVAL PROCEDURE

1. Remove the multifunction alarm assembly from the convenience center located under the left side of the instrument panel.
2. Release the single tab connector on the top of the assembly.
3. Pull out the single tab connector.

INSTALLATION PROCEDURE

1. Install the multifunction alarm assembly to the convenience center.
2. Align the retaining tab.
3. Press the tab in place

  • Relays and Modules
  • Relays and Modules - Instrument Panel
  • Audible Warning Device Control Module
  • Component Information
  • Service and Repair

Relays and Modules - Lighting and Horns > < A/C Compressor Clutch Relay|Page 172